ASME SA283 Grade D/SA283 GrD steel plate is katalor’s star product, and ASME SA283 Grade D/SA283 GrD steel plate ‘s stock located in shanghai ,zhengzhou and tianjin. We will stock some ASME SA283 Grade D/SA283 GrD steel plate for our old clients who often order ASME SA283 Grade D/SA283 GrD steel plate from us. please send your enquiry to us if you want to get an offer.
The rolling size of ASME SA283 Grade D/SA283 GrD steel plate katalor supplied:
| Thickness | 1.2-600mm |
| Width | 1220-4200mm |
| Length | 5000-18000mm |
Notes: coil thickness ≤ 25mm
ASME SA283 Grade D/SA283 GrD steel plate Chemical Composition( %):
| Grade/ Material | Element | Composition(Max-A, Min-I) |
| SA283 Grade D/ SA283 GrD | C | A:0.27 |
| Mn | 0.90 | |
| Si | A:0.40 | |
| P | A:0.035 | |
| S | A:0.04 |
ASME SA283 Grade D/SA283 GrD steel plate Mechanical Properties( Mpa)
| Grade/ Material | Tensile Test | Ksi/MPa |
| SA283 Grade D/ SA283 GrD | Tensile Strength | 60-80/415-550 |
| Yield Strengh | I:33/230 | |
| Elongation | I:20% | |
| Impact Test( if any) |
Requirements for the purchaser of ASME SA283 Grade D/SA283 GrD steel plate are
listed in Specification A 6/A 6M. Several that are considered suitable for use with
this specification are listed by title:
1.Product Analysis,
2.Simulated Post-Weld Heat Treatment of
Mechanical Test Coupons,
3.Charpy V-Notch Impact Test,
4.Drop Weight Test,
5.Ultrasonic Examination,
6.Bend Test, and
7.Reduction of Area.
8.Limitation on Rimmed or Capped Steel:
9.The steel shall be other than rimmed or capped.
Requirements shall not apply unless specified on the order of ASME SA283 Grade D/SA283 GrD steel plate. Requirements other than those shown above may be specified subject to agreement between the supplier and the purchaser of ASME SA283 Grade D/SA283 GrD steel plate. please contact us timely if you want to get an offer of ASME SA283 Grade D/SA283 GrD steel plate form us.
